Solar & Battery Regulation & Incentive Programs

Interconnection Standards

Program Overview


Category:
Regulatory Policy
Program Type:
Interconnection
Implementing Sector:
State
State:
South Dakota
Eligible Storage Technologies:
Geothermal Electric, Solar Thermal Electric, Solar Photovoltaics, Wind (All), Biomass, Hydroelectric, Combined Heat & Power, Fuel Cells using Non-Renewable Fuels, Landfill Gas, Wind (Small), Hydroelectric (Small), Anaerobic Digestion, Fuel Cells using Renewable Fuels, Other Distributed Generation Technologies, Microturbines
Applicable Utilities:
Investor-owned utilities
System Capacity Limit:
10 MW
Standard Agreement:
Yes
Insurance Requirements:
Vary by system size and/or type; levels established by PUC
External Disconnect Switch:
Utility's discretion
Net Metering Required:
No
Applicable Sectors:
Commercial, Industrial, Local Government, Nonprofit, Residential, Schools, State Government, Federal Government, Tribal Government, Agricultural, Institutional
Last Updated:
10/27/2016

Summary

South Dakota’s interconnection standards for distributed generation, adopted by the state Public Utilities Commission (PUC) in May 2009, apply to customers of investor-owned utilities.* The rules provide for four levels of interconnection for systems up to 10 megawatts (MW) in capacity:

  • Tier 1 applies to inverter-based systems up to 10 kilowatts (kW) in capacity that use lab-tested equipment.
  • Tier 2 applies to systems up to 2 MW in capacity that use lab-tested equipment.
  • Tier 3 applies to systems up to 2 MW in capacity that do not export electricity.
  • Tier 4 applies to systems up to 10 MW in capacity that do not meet the requirements of Tier 1, Tier 2 or Tier 3.

Technical screens have been established for each level, and the Institute of Electrical and Electronics Engineers 1547 technical standard is used for all interconnections. Reasonable time frames for application and approval are set forth in the rules. System owners are generally responsible for all interconnection expenses, including interconnection equipment, utility system upgrades, and adverse system impacts. Utilities are authorized to require the use of an external disconnect switch. Limited interconnection to area networks is permitted.

General liability insurance is required, with levels that vary by tier (For Tier 1 systems, only “proof of adequate homeowners, general liability or commercial liability insurance sufficient to insure against all reasonably foreseeable direct liabilities given the size of the small generator facility” is necessary). For all systems other than residential generators up to 10 kW in capacity, the customer must include the utility as an “additional insured.” The PUC staff may assist with dispute resolution when appropriate.


* The PUC’s rules do not apply to customers of electric cooperatives or municipal utilities.


Authorities

NameEnacted DateEffective DateExpired Date
S.D. Administrative Code § 20:10:365/28/2009