Solar & Battery Regulation & Incentive Programs
Note: A decision filed by the Georgia Public Service Commission in Georgia Power's 2019 rate case requires Georgia Power to offer net metering with monthly netting to 5,000 rooftop solar customers or 32 MW of capacity, whichever comes first. The summary below describes the rules before the 2019 rate case ruling, which will take effect again when the 5,000 customer threshold is reached for monthly netting.
The Georgia Cogeneration and Distributed Generation Act of 2001 allows but does not require net energy metering to be adopted by utilities. The law requires all utilities -- investor-owned utilities, municipal utilities and electric cooperatives -- to offer bidirectional or single directional metering to customer generators, depending on how the customer's facility is connected to the grid. Eligible technologies include photovoltaic (PV) systems, fuel cells and wind turbines up to 10 kilowatts (kW) in capacity for residential applications, and systems up to 100 kW for commercial applications. The aggregate capacity of such systems is limited to 0.2% of a utility's system peak demand from the previous year.
Georgia Power does not offer a net energy metering tariff. Systems connected on the customer's side of the meter use a bi-directional meter, and any net excess generation (NEG) is credited to the customer's next bill at a predetermined rate filed with the Georgia Public Service Commission (this is currently the Solar Avoided Cost for Georgia Power) . Alternatively, a customer may choose to sell all electricity from a system (rather than using the electricity generated by the system) by connecting ahead of the meter.
Net energy metering tariffs filed by cooperatives are recorded in Docket # 31536 on the Georgia Public Service Commission's website. Customers should contact their utility to see if it offers net metering.
HB 57 allows residential and commercial customers to work with third parties to install, operate, lease, and/or finance solar systems. The limit for residential customers is 10 kW and the limit for commercial customers is 125% of the actual or expected peak demand of the premises. All systems must meet applicable safety, power quality, and interconnection requirements. Commercial systems above 100 kW and residential systems above 10 kW are not explicitly prohibited at this time but may be subject to additional compliance requirements.
Name | Enacted Date | Effective Date | Expired Date |
---|---|---|---|
O.C.G. § 46-3-50 et seq. | 04/28/2001 | 06/01/2002 |